top of page

HPLC-Online-Degasser

Operation Principle of the Online-Degasser
In a vacuum chamber, the solvent to be degassed is distributed into several, parallel arranged, semi-permeable membrane chambers.
When a high vacuum (more than -850 mbar) is applied, only the in the liquid dissolved gases are diffusing through the thin membrane.

With a total solvent volume of 8 ml per degassing channel, the Degasser S 7510 achieves an extremely low remaining gas concentration of 0.5 to 5 ppm oxygen, depending on the degasser's flow rate (0 to 10 ml/min.).


With a given flow rate; the degassing quality can be further increased by coupling two or several membrane channels. The digital display of the actual vacuum in millibar makes the degasser S 7510 the first vacuum degasser on the market which functions can be checked and documented at any time.
The degasser S 7510 is availabel with and without digital display. All functions are the same for both degasser S 7510.
 
Degassing method

 with an applied vacuum, dissolved gases are continuously 
 removed through a semi-permeable membrane

Max. flow rate  max. 10ml/min. for each degassing channel
Max. efficiency  0,5 ppm oxygen at 0,5 ml/min
Parts which come in contact with the solvent  PTFE and PEEK
Channels  2, 3 or 4 channels
Volume per each channel  ~ 8ml
Power supply  220/110 V 50/60 Hz
Dimensions  110 x 150 x 350mm
Weight  5,6 kg

Cat-no.

                        Description              

SDS-7510-OD-2

                   2 Channel Degasser without display

SDS-7510-OD-3                    3 Channel Degasser without display

SDS-7510-OD-4

 

                   4 Channel Degasser without display

 

SDS-7510-D-2                    2 Channel Degasser with display
SDS-7510-D-3                    3 Channel Degasser with display
SDS-7515-D-4                    4 Channel Degasser with display